Sign in or 
Share this
Forks:Custom 1
Custom Brush Forks
This one is on a B3030, not a BX, but a similar design could be used on your BX.[Description and pics courtesy of Toolguy from TractorByNet.]
I didn't want to spend a lot of money because once the main piles are moved I probably won't use them again very much. This is what I made. I started with a piece of 2x3" tubing along the back of the bucket. I welded tabs on the ends and then bolted it through the side of the bucket. I then welded five pieces of 4" channel iron 40" long to the tube and bolted it to the bucket. Then two 3" pieces of channel 36" long welded to the 4" channel upright and bolted to the top edge of the bucket with tabs welded to the 3". I then put some 4' 2x4s across to hold more stuff.
This is the result. It takes three normal loads to fill my little 4' x 7' trailer. I then pile the bucket full by hand and make the trip to the burn pile. Once there, I unhook the trailer and use the bucket to tip it up and dump it.
apmillard |
Latest page update: made by apmillard
, Jan 18 2008, 11:13 PM EST
(about this update
About This Update
Edited by apmillard
view changes - complete history) |
|
Keyword tags:
None
More Info: links to this page
|
There are no threads for this page.
Be the first to start a new thread.
